Protects the rope from abrasion against an edge.
The edge-ring guides on the angle of the edge protector keep different rope anchor lines from getting entangled over the edge.

Weight: 0,570 kg.

Fabric/Materials
Stainless Steel.

Ladder extension for extremity mounting bracket for vertical fall arrest system sliding on cable KS 2001, KS 6000 or KS 7000

Features
- For vertical fall arrest system on cable KS 2001, KS 6000 or KS 7000.
- This extension can be installed on any kind of ladder and allows to elevate the anchorage point of the wire rope anchorage line by 1.30 m. Thus the operator can safely leave the ladder and disengage his/her fall arrest system on a platform where there is no risk of fall.
- Provided with fastenings.

Weight: 7.67 kg.
Static strength > 12 kN

Fabric/Materials
Material : Galvanized steel

Standards
EN795: 2012 Type A

- Used for installing a vertical anchor line at the top or the bottom of a ladder, with U-bolts.
- Compatible with KS2001 System (sliding fall arrest system on flexible cable), KS6000 and KS7000 System (sliding fall arrest system on rigid cable).
- Provides structural strength to the system.
- Compatible with various rung gauges (from 25 cm to 40 cm).

Weight: 1.11 kg.
Breaking strength : 23 kN.

Fabric/Materials
Inox

Standards
EN795: 2012 Type A
EN353-1 : 2014 A1 :2017

Cable extremity for KS 2001, KS 6000 and KS 7000 systems

Features
Weight: 0.39 kg
Allows the crimping of the cable at the desired length and eliminates the danger of any loose wire.

Fabric/Materials
Material: Steel

Standards
EN353-1 : 2014

Weight: 1.23 kg
Necessary to reduce the impact force due to the arrest of the fall in the facility.

Fabric/Materials
Stainless steel.

Standards
EN353-1 : 2014

Weight: 1.05 kg
Regulates the tensioning of cable (tension about 80 daN) by simple rotation

Fabric/Materials
Stainless steel

Standards
EN353-1 : 2014

Weight : 6 kg
To ensure a minimum tension on the stainless steel wire rope.

Fabric/Materials
Steel

Intermediate cable guide for stainless steel wire rope used for KS 2001, KS 6000 and KS 7000 systems.

Fabric/Materials
Installed every 8 mtrs.
This piece can be used on KS 2001, KS 6000 and KS 7000 systems

Standards
EN353-1 : 2014

Mounting Brackets for KS 2001, KS 6000 and KS 7000 systems.

Features
Breaking strength > 23 kN
Static strength > 12 kN

Standards
EN795:2012 Type A

Stainless Steel wire rope for KS2001, KS6000, KS7000 and KS4000 systems.

Features
The length of the wire rope has to be specified depending on the length of the support to equip.
This piece is used on KS2001, KS6000, KS7000 and KS4000 systems.
Dimensions : 8 mm diameter 7x19

Fabric/Materials
Material : Wire rope

Standards
EN353-1 : 2014 A1:2017
EN353-2 : 2002,

Length: 1m
Diameter: 8mm
Minimum breaking strength > 36 kN

Fabric/Materials
Inox

Rope Grab for rigid stainless steel wire rope, adapted to the KS6000 system.

Features
Works on rigid stainless steel cable system.
Minimum breaking strength > 15 kN.

Fabric/Materials
Material: Stainless steel

Standards
EN 353-1:2014

Rope Grab for rigid stainless steel wire rope, adapted to the KS7000 system.

Features
Works on rigid stainless steel cable system.
Minimum breaking strength > 15 kN.

Fabric/Materials
Material: Stainless steel 316

Standards
EN 353-1:2014

Rope Grab for rigid and flexible stainless steel wire rope, adapted to the KS2001 systems.

Features
Works on rigid or flexible stainless steel cable system.

The sliding fall arrester KRATOS SAFETY is in stainless steel 316. It comes with a shock absorber with 2 steel screw-locking connectors. It has a non-inverting system to prevent installing the device upside down on the anchor line, its design allows the sliding fall arrester to be installed / uninstalled at any level on the cable.

Breaking strength > 15 kN

Standards
EN 353-2:2002

Fall Arrester on polyamide kernmantle rope with a 12 mm diameter.

Features
- Works on 12 mm diameter Polyester anchorage line.
- Steel Karabiner FA 50 101 17 as an attachment element.
- Simple opening / closing.
- Has a manual locked position to allow work on inclined roof.

Breaking strength : > 15 kN
Connector : 1 steel screw-locking karabiner FA 50 101 17

Fabric/Materials
Material : Inox

Standards
EN353-2:2002

with removable energy absorber and integrated dia. 11 mm anchorage line

Features
Sliding fall arrester permanently attached to its anchor line (Kernmantle polyamide rope, 11 mm diameter).
Comes with a removable energy absorber.

Can be used up to 140kg as sliding fall arrester (EN 353-2) only in combination WITH the energy absorber.
Can be used up to 100 kg as a work positioning device (EN 358) only WITHOUT the energy absorber

Thimbled loop at the top for improved resistance to abrasion and manufactured end on the other side.
Seams protected under transparent sheath.
Coloured wear threads to visually monitor the wear of the lanyard.

Fabric/Materials
Material: Rope grab: Aluminium,
Anchor line: Polyamide

Standards
EN 353-2:2002, EN 358:1999

to be used on polyamide kernmantle rope 11mm

Features
- Rope grab made of high strength Aluminium alloy, which is extremely light in weight and corrosion resistant.
- Works on 11 mm diameter anchorage line (Polyamide Kernmantle rope).
- Steel Karabiner FA 50 102 17 as an attachment element.
- Very simple opening-closing system.
Anchorage line available in lengths from 10 m to 50 m.

Breaking strength : > 15 kN
Connector : 1 steel screw-locking karabiner FA 50 102 17

Fabric/Materials
Material : Aluminium

Standards
EN353-2:2002, EN 358:1999